سال انتشار: ۱۳۸۶

محل انتشار: دهمین کنگره ملی خوردگی ایران

تعداد صفحات: ۱۰

نویسنده(ها):

A.J Arabzadeh – MSc. Student, School of Metallurgy and Materials Eng., Department of Eng., University of Tehran
S.R AlIahkaram – Associate prof, School of Metallurgy and MtJterials s Eng., Department of Eng., University of Tehran

چکیده:

Desalting plants are often insta.lled in crude oil production units in order to remove water soluble salts from an oil stream. The effect of an organic corrosion inhibitor on the corrosion rate of C-Steel in a desalting plant has been investigated by various corrosion monitoring techniques. The adsorption process was round to obey the Langmuir adsorption isotherm. The effect of adding the bisulfite oxygen scavenger to this corrosion inhibitor, investigated by the wheel test method causes a great reduction of corrosion rate in this medium which shows the synergistic effect of these two materials. Figure 1 shows the effect of adding a film forming corrosion inhibitor on C-Steel in a desalting plant and figure 2 shows the synergistic effect of 20Oppm. the bisulfite oxygen scavenger and the film furming corrosion inhibitor obtained by the wheel test method in this medium according to the NACE 10 – 182 standard.
AB Figure2 shows, the synergistic effect of the two materials is a great decrease ofthe corrosion rate in a desalting plant.